saphir
|
Line |
Amazone |
|
|
Description |
Oval above ground |
|
|
Available sizes |
8’ x 16’ |
10’ x 18’ |
10’ x 22’ |
|
|
|
13’ x 25’ |
15’ x 27’ |
15’ x 31’ |
|
|
|
Wall height |
52’’ |
Flat bottom with tubular steel structure |
|
|
Choice of color |
Hazelnut |
Mahogany |
Dark walnut |
|
|
|
Components |
- 4’ ( 1,2 m) wide wooden structural panels, pre-assembled at the plant with +/- 4’’ (10 cm) wide planks with moulded mortises and tenons; wall height 52” (1,32 m);
- Panels are flexible and the quantity of panels used determines the dimension of the pool;
- Straight walls made from converting flexible panels into rigid panels using 1 ½’’ x 2 ½’’ x 1/8’’ (3,81 cm x 6,35 cm x 3,175 mm) steel tubes, which have been powder coated and pre-treated with an 11-step zinc phosphate immersion (E-coat) for better corrosion protection; submitted to a 2,000 hour salt mist test;
- All steel parts used for the assembly of the straight wall are galvanized and exposed parts are painted with polyester powder coating for maximum corrosion and UV protection; submitted to a 1,500 hour salt mist test;
- Columns are 100% wood, solid and aesthetic. They are handmade and are bonded and screwed in the plant;
- 100% one piece wooden top rail, 9’’ ( 23 cm) wide;
- Non-slip seat cap made with easy-to-install talc-filled resin;
- Full height 49’’ ( 124,5 cm) wood fastener cover, attractive and secure;
- Solid pool assembly using three 5/16” (8mm) galvanized steel cables in an aesthetic plastic sheath that provides protection against chlorine and salt. Cables’ breaking point : 9800 lbs;
- Nuts, bolts and screws are protected by Magni 599 coating, which was submitted to a 1,000 hour salt mist test and approved for use with ACQ-treated wood;
- 1/8’’ (3,2 mm) insulating foam inserted between the liner and wood panels, to provide a smooth surface that protects the liner;
- Vinyl liner fastened with a standard in ground pool fastening system, installed in the plant;
- Packaging: delivered on pallets in 3 or 4 boxes, depending on the size.
|
|
|
Wood species used: |
- Gray pine treated at high temperature for the walls;
- Red cedar for the top rails;
- Yellow pine pressure treated with micronized copper azole (MCA) for the columns, posts and braces.
|
|
|
Model With brace: |
- Straight wall are supported with a wood strut system.
|
|
|
Braceless Model: |
- Solid pool assembly using a structure made of 2 ½’’ x 3 ½’’ x 3/16’’ (6,35 cm x 8,90 cm x 4,76 mm) steel beams.
|
|
Self supporting steel assembly
